Showing posts with label Kepler-10. Show all posts
Showing posts with label Kepler-10. Show all posts

Tuesday, 3 June 2014

Kepler 10c - The Latest Earth Match

'Latest Earth Match': The newly discovered Kepler-10c dominates the foreground in this artist's conception. Its sibling, the lava world Kepler-10b, is in the background and both orbit a star like our sun. Photo:Reuters/Centre for Astrophysics
Kepler-10c is an exoplanet orbiting G-type star Kepler-10, located around 560 light-years away in Draco. Its discovery was announced by Kepler in May 2011, although it had been seen as a planetary candidate since January 2011 when Kepler-10b was discovered. The team confirmed the observation using data from NASA's Spitzer Space Telescope and a technique called Blender that ruled out most false positives. Kepler-10c was the third transiting planet to be confirmed statistically (based on probability rather than actual observation), after Kepler-9d and Kepler-11g. The Kepler team considers the statistical method that led to the discovery of Kepler-10c as what will be necessary to confirm many planets in Kepler's field of view.
Kepler-10c orbits its host star every forty-five days at a quarter of the average distance between the Sun and Earth. It has a radius more than double that of Earth, but a higher density, making it the largest and most massive rocky planet discovered as of June 2014.

Discovery and confirmation

In January 2011, the closely orbiting planet Kepler-10b was confirmed in the orbit of the star Kepler-10 after measurements of its transiting behavior (where it crosses in front of Kepler-10, periodically dimming it) and a radial velocity effect detected in Kepler-10's spectrum provided the information needed to prove that it was indeed a planet. An additional, longer-period dimming was detected in Kepler-10's spectrum, suggesting that a second planet existed in the system; however, there remained the possibility that this signal could have been caused by some alternative reason, and that the transit event was a false positive. Attempts to measure the radial velocity effects of this object, now named KOI 072.02, were fruitless; therefore, to rule out false positive scenarios, the Kepler team used a technique called Blender.
The application of Blender was supplemented by use of the IRAC instrument on the Spitzer Space Telescope, which was used on August 30 and November 15 in 2010 to further define Kepler-10's light curve at the point where KOI 072.02 appeared to transit it. It was found that the transiting object did not produce a color, an aspect that is characteristic of stars. This suggested even further that KOI 072.02 was a planet. In addition, the IRAC instrument found no difference in the transit signal when comparing the star's light curve in the infrared and in visible light; stars that are aligned with Kepler-10 might appear visibly similar, but would appear different in the infrared.
The WIYN Observatory's 3.5m telescope was used for speckle imaging on June 18, 2010; in addition, the PHARO camera on the Palomar Observatory's 5m telescope was used for its adaptive optics capabilities. These observations, combined with observations of Kepler-10's spectrum taken from the W.M. Keck Observatory, to rule out the possibility that a nearby star's light was corrupting the observed spectrum of Kepler-10 and creating the results that had led astronomers to believe that a second planet existed in Kepler-10's orbit. All of these possibilities, with the exception of if such a star existed exactly behind or in front of Kepler-10, were effectively ruled out; even with this, the Kepler team found that if a star was indeed aligned with Kepler-10 as seen from Earth, such a star would probably not be a giant star.
With a greater degree of certainty established, the Kepler team compared the models formed using Blender to the photometric observations collected by the Kepler satellite. The Blender technique allowed the Kepler team to rule out the majority of the alternatives including, notably, that of triple star systems. Blender then allowed the Kepler team to determine that although all models representing hierarchical triple stars (a binary system between a single star and a double star) can resemble the light curve of Kepler-10, the aforementioned follow-up observations would have detected them all. The only possible blends remaining after ruling out hierarchical triple stars was that of determining if the curve is caused by interference from a background star, or if it is indeed caused by the orbit of a transiting planet.
Comparisons of KOI 072.02 to the 1235 other Kepler Objects of Interest in Kepler's field of vision allowed astronomers to use models that led to the confirmation of KOI 072.02 as a planet with a high degree of certainty. KOI 072.02 was then renamed Kepler-10c. The planet's confirmation was announced at the Boston meeting of the American Astronomical Society on May 23, 2011.
Kepler-10c was the first Kepler target to be observed using Spitzer with the hope of detecting a shallow transit dip in a light curve. At the time of Kepler-10c's discovery, Spitzer was the only facility capable of detecting shallow transits in the Kepler data to an extent at which the data could be meaningfully analyzed. The planet was also the third transiting planet that was validated through an analysis of statistical data (rather than actual observation), after the planets Kepler-9d and Kepler-11g. In Kepler-10c's confirmation paper, the Kepler team discussed how a large fraction of planets in Kepler's field of view would be confirmed in this statistical manner.

Host star

Kepler-10 is a G-type star located 173 parsecs (564 light years) from Earth. The star is 0.895 solar masses and 1.056 solar radii, making the star slightly less massive than the Sun, but approximately the same size. With an effective temperature of 5627 K, Kepler-10 is cooler than the Sun. The star is also metal-rich and far older: respectively, its metallicity is measured at [Fe/H] = -0.16 (71% the amount of iron in the Sun), and its age at 11.9 billion years. Kepler-10 has an apparent magnitude of 10.96, which means that the star is invisible to the naked eye from the perspective of an observer on Earth.
There are two planets known in the orbit of Kepler-10, the first being Kepler-10b. Kepler-10b is a rocky planet that orbits Kepler-10 every 0.8 days at a distance of 0.01684 AU.

Characteristics

Kepler-10c is the second planet in Kepler-10's orbit, circling its star every 45.29485 days at a distance of 0.2407 AU, or 24% of the mean distance between the Earth and Sun. Kepler-10c's radius is estimated at 0.2 times the radius of Jupiter and 2.235 times the radius of Earth. At the time of its confirmation, Kepler-10c's mass had not yet been well-defined, and was estimated to have an upper limit of 0.06 times the mass of Jupiter and an upper limit of 20 times the mass of Earth. Kepler-10c's equilibrium temperature is estimated at 485 K, almost four times hotter than Jupiter. The planet's orbital inclination is 89.65ยบ, or almost edge-on with respect to Earth and to Kepler-10. Transits have been observed at points where Kepler-10c has crossed in front of its host star.
Kepler-10c has the mass of 15-19 of Earth's. With a radius only 2.35 (2.31 to 2.44) times that of Earth (and so a volume 12-15 times that of Earth), and a density higher than Earth, it is the largest and most massive rocky planet known as of June 2014.

Source : http://en.wikipedia.org/wiki/Kepler-10c#Host_star

Tuesday, 16 October 2012

Planet Kepler 10B Orbiting its Host Star

Planet Kepler 10B Orbiting its Host Star

Kepler-10b orbits one of the 150,000 stars that the spacecraft is monitoring between the constellations of Cygnus and Lyra. We aim our mosaic of 42 detectors there, under the swan’s wing, just above the plane of the Milky Way galaxy. The star itself is very similar to our own sun in temperature, mass and size, but older with an age of over 8 billion years, compared to the 4-and-1/2 billion years of our own sun. It’s a quiet star, slowly spinning with a weak magnetic field and few of the sun spots that characterize our own sun. The star’s about 560 light years from our solar system and one of the brighter stars that Kepler is monitoring. It was the first we identified as potentially harboring a very small transiting planet. The transits of the planet were first seen in July of 2009.

The diameter of Kepler-10b is only about 1.4 times the diameter of Earth and it's mass is about 4.5 times that of Earth. It is the best example of a rocky planet to date.

Credit: NASA/Kepler Mission/Dana Berry

An Imagined Canyon on Planet Kepler 10-b

An Imagined Canyon on Planet Kepler 10-b

The daytime temperature’s expected to be more than 2,500 degrees Fahrenheit, hotter than lava flows here on Earth, hot enough to melt iron! Many years ago, before Kepler launched, members of what became the Kepler team built a robotic telescope at Lick Observatory to learn to do transit photometry--detecting drops in brightness of stars when planets pass in front of them. We called it the “Vulcan Telescope,” named after the hypothetical planet that scientists in the 1800’s thought might exist between the Sun and Mercury. A planet that might explain the small deviations in Mercury’s orbit that were later explained with Einstein’s theory of general relativity.

Vulcan is the god of fire in Roman mythology, a name befitting of a world so close to the Sun. The artist’s rendering of Kepler-10b is reminiscent of that hypothetical planet Vulcan. The Kepler team came full circle in its quest. We know that we’ve only begun to imagine the possibilities.
Credit: NASA/Kepler Mission/Dana Berry

Planet Kepler 10-B in Orbit

Planet Kepler 10-B in Orbit

Planet Kepler-10b is orbiting it star about 20 times closer to its star than Mercury is to our own Sun. It takes less than one Earth day to orbit its star! The daytime temperature’s expected to be more than 2,500 degrees Fahrenheit, hotter than lava flows here on Earth. It is the smallest exoplanet (a planet located outside our solar system) discovered to date. All of Kepler’s best capabilities have converged to yield the first solid evidence of a solid planet orbiting a star other than our Sun.Knowledge of the planet is only as good as the knowledge of the star it orbits. Scientists of the Kepler Asteroseismic Science Consortium (KASC) were able to detect high frequency variations in the star’s brightness generated by stellar oscillations, or “starquakes.” Data arising from light waves that travel within the interior of the star lead to better understanding of the star, just as earthquakes are used to learn about the interior structure of Earth. As a result of this analysis, Kepler-10 is one of the most well . characterized planet-hosting stars in the universe next to the Sun. This analysis also allowed scientists to pin down the properties of Kepler-10b. It is unequivocally a rocky planet, with a surface you could stand on, a mass 4.6 times that of Earth, a diameter 1.4 times that of Earth, and an average density of 8.8 grams per cubic centimeter -- similar to that of an iron dumbbell.

Credit: NASA/Kepler Mission/Dana Berry

Kepler 10b Planet Comparison

Kepler 10b Planet Comparison

here is a comparison of Kepler 10b Planet with other planets.Temperature and Size of different planets from our solars system and kepler system are compared.

Kepler-10 Stellar Family Portrait

Kepler-10 Stellar Family Portrait

This artist's conception depicts the Kepler-10 star system, located about 560 light-years away near the Cygnus and Lyra constellations. Kepler has discovered two planets around this star. Kepler-10b is, to date, the smallest known rocky exoplanet, or planet outside our solar system (dark spot against yellow sun). This planet, which has a radius of 1.4 times that of Earth's, whips around its star every .8 days. Its discovery was announced in Jan. 2011. Now, in May 2011, the Kepler team is announcing another member of the Kepler-10 family, called Kepler-10c (larger foreground object). It's bigger than Kepler-10b with a radius of 2.2 times that of Earth's, and it orbits the star every 45 days. Both planets would be blistering hot worlds.

Kepler-10c was first identified by Kepler, and later validated using a combination of a computer simulation technique called "Blender," and NASA's Spitzer Space Telescope. Both of these methods are powerful ways to validate the Kepler planets that are too small and faraway for ground-based telescopes to confirm using the radial-velocity technique. The Kepler team says that a large fraction of their discoveries will be validated with both of these methods.

In the case of Kepler-10c, scientists can be 99.998 percent sure that the signal they detected is from an orbiting planet. Part of this confidence comes from the fact thatSpitzer, an infrared observatory, saw a signal similar to what Kepler detected in visible light. If the signal were coming from something other than an orbiting planet -- for example an indistinguishable background pair of orbiting stars -- then scientists would expect to see different signals in visible and infrared light.

Image credit: NASA/Ames/JPL-Caltech